Dron iFlight Nazgul5 V2 LED HD Vista Polar 4s

Wymagana znajomość budowy oraz ustawiania dronów opartych na kontrolerach z oprogramowaniem betaflight oraz systemu DJI AIR Unit

System CADDX Vista wymaga intensywnego chłodzenia podczas programowania i bindowania. Dlatego podczas aktywacji, drona należy umieścić pod silnym strumieniem powietrza. Uszkodzenia wynikłe z przegrzania nie są objęte gwarancją.

Specyfikacja:

iFlight Nazgul5 V2 LED HD Vista Polar

Dron BNF współpracujący z Goglami DJI FPV System

Kontroler lotu : Succex-E F7

Regulator : Succex-E 4x45A

Silniki: XING 2207 LED 2450kv

VTx / Kamera : CADDX POLAR / VISTA Digital HD System

Odbiornik RC: Brak

Rozmiar śmigieł: 5"

Zalecane zasilanie:

Wersja 4s: Lipo 4s: 1300-1800mAh 

Link do strony Producenta

Nazgul5 HD w/Caddx Polar Vista Digital HD System LED

Description

Product Description

Nazgul5 HD is a 5" size BNF (Bind-and-Fly) quadcopter with Caddx Vista Digital HD System on it. We sticked the lighter Caddx Vista on one of our new updated XL5 V5 FPV frames. Pre-tuned and setup, everything you need is just bind-and-fly! Loads of power and smooth flights guaranteed using our popular XING 2207 with LED light motors with long-lasting NSK bearings. Got a hard hit and snapped an arm? Don't worry, get some spares with your order and easy-swap out in field. Wanna strap your GoPro on that beast as well? Checkout our collection of high quality TPU prints for your cam!

Note: iFlight R81-SPI Frsky (Compatible with Frsky ACCST D8）

HIGHLIGHTS:

- 5mm arm design for more durability

- Easy-Swap arms

- LED illuminated Logo

- XING 2207 motors with LED light
- 5" version also fits 5.1" style propellers
- Popular True-X configuration
- TPU crash-guards
- Fits both 30.5x and 20x stacks

XL5 V5 frame specs:

SucceX-E F7 45A flight stack
XING 2207 FPV Motor with LED light（6S 1800kv / 4S 2450kv)
Wheelbase: 240mm*240mm
Body size: 170*170mm
Propeller size: 5 inch /5.1 inch
FC pattern: 30.5*30.5/20*20 mm
FPV cam spacing: 19mm
Weight: 408.5g (without battery)

PRE-TUNED & PRE-SETUP:

- Don't worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on "Firmware/Factory Dumps"

- Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn't end in a mess!

Please check our linked article on "How to disable Angle-Mode, activate Acro-Mode"

Nazgul5 HD Quad BNF Included Components and Parts

Prebuilt and tested Quadcopter
1x XL5 V5 Frame
1x Caddx Polar Vista Digital HD System Kit
1x Albatross LHCP RP-SMA 5.8g antenna
2sets x Nazgul 5 inch 3-blades (Set of 4 - Color may vary)
1x 20*200mm Microfiber PU Leather Battery Strap (Color May Vary)
1x 20*250mm Microfiber PU Leather Battery Strap (Color May Vary)

FC // SucceX-E F7 Flight controller

- MCU: STM32F722 216MHz

- Gyro: MPU6000

- Baro: NO

- OSD: IFLIGHT OSD （AT7456E）

- BEC: 5V 2.5A

- BlackBox: 16MB

- Currentscale: 100（WithiFlightESC）

- Uart: 4*UART(UART1、UART2、UART4、UART5)

- UART1 for VTX HD（for 4-6S Vista，for 4S DJI Air Unit）/AnalogTelemetry

- UART2 for Receiver

- UART4 for Free

- UART5 for ESC Telemetry

- 4×Dshot/PWM outputs

- Smartaudio & IRC Tramp VTX protocol supported

- WS2812 led Strip: Yes

- Bepper: Yes

- Firmware: IFLIGHT_SUCCEX_E_F7

- Outer Size: 36*36mm / 30.5*30.5/φ4 mounting

- Weight: 6.9g

- Mounting hole: 30.5*30.5mm，φ4mm

- Size: 36*36mm

ESC // SucceX-E 45A 2-6S BLHeli_S 4-in-1 ESC

- Dimension: 36*43mm

- Mounting Holes: 30.5*30.5mm/Φ3mm

- Weight: 15g (without wire)

- Supports 2-6S Lipo input

- EFM8BB21 MCU, 24Mhz Runs BLHeli_S 16.X Firmware

- Current sensor: YES

- BEC: NO

- Constant: 45A / Burst: 50A

- Supports: DShot150/300/600/MultiShot/OneShot etc.

- Target: G-H-30 BLS 16.7

Additional Suggested Parts

DJI HD FPV Goggles
Radio Controller
Battery 4S 1550mAh
GoPro Mounts

Important

The DJI Remote Controller is recommended for beginners since you won't need to set up another receiver, but it is also optional in this BNF drone because it is NOT required in order to use the FPV system. If you don't choose to use the DJI Remote Controller, you can choose a receiver option for your transmitter. and then bind to your own radio as usual.

Note:

All iFlight BNFs are tested before shipment to guarantee highest quality.

If you still encounter a problem after receiving your shipment, please immediately contact our iFlight customer support at www.iflightrc.freshdesk.com.

iFlight takes no responsibility for issues with DJI or Caddx 3rd party gear (Video transmitters, Goggles, Radios, etc) and must be directly reported to www.caddxfpv.com/pages/contact-us or www.dji.com/support.